Do PSI Audio products work in all countries? How do I know which fuses I need?

2017-12-19T22:38:41+01:00

Yes PSI Audio products will work in all countries. It is important however that the voltage is set to match the voltage of the mains (i.e.  230 V or 115 V). This is normally done by the importer who will make sure the products are set up for the local network. The procedure is explained [...]

Do PSI Audio products work in all countries? How do I know which fuses I need?2017-12-19T22:38:41+01:00

Can you guarantee that AVAA technology will work in my room?

2017-12-03T11:19:55+01:00

The AVAA will work in all rooms and do its job in all rooms. However the effect will be dramatic on room modes below 150 Hz and when positioned in the high pressure areas of the room modes (typically in most rigid corners). If you have long ringing and disturbing room modes the AVAA will [...]

Can you guarantee that AVAA technology will work in my room?2017-12-03T11:19:55+01:00

Where to place the AVAAs in my room?

2017-11-22T22:47:11+01:00

The most effective position for the AVAA is in a location where the walls contribute most to the room modes that are disturbing in the listening position. In practice it is very easy to position the AVAA effectively after a few comparative trials. The starting position is in corners behind the source speakers as this [...]

Where to place the AVAAs in my room?2017-11-22T22:47:11+01:00

How many AVAAs do I need?

2017-11-22T22:46:31+01:00

 2 AVAA will have a significant effect in most rooms. Depending on the dimension and type of room as well as the result required, between 2 and 4 AVAAs are necessary for most normal size rooms (20 and 80 m2) For very small rooms a minimum of two AVAAs is still recommended to have a [...]

How many AVAAs do I need?2017-11-22T22:46:31+01:00

What is the advantage of AVAA compared to the best possible passive material?

2017-12-03T11:25:48+01:00

The AVAA is a very effective solution to absorb frequencies below 150 Hz. It is much smaller (up to 25 times) and thinner (up to 15 times at 20 Hz) then any porous material needed to have the same effect. Therefore it allows saving space and it also avoids over-dampening the higher frequencies which is [...]

What is the advantage of AVAA compared to the best possible passive material?2017-12-03T11:25:48+01:00

Why is AVAA better than traditional passive absorption?

2017-12-03T11:40:07+01:00

The AVAA is a very effective solution to absorb frequencies below 150 Hz. It is much smaller (up to 25 times) and thinner (up to 15 times at 20 Hz) then any porous material needed to have the same effect. Therefore it allows saving space and it also avoids over-dampening the higher frequencies which is [...]

Why is AVAA better than traditional passive absorption?2017-12-03T11:40:07+01:00
Go to Top