When the AVAAs are positioned in a high pressure area of a room mode, the room mode resonance time (RT60) is typically reduced by 30% to 50%. The result is less low frequency ringing, clearer mids and highs with reduced masking effect and better imaging.
This is a known bug that will be resolved in the next software update.After resetting the credentials, connecting the C214 and switching it off, the connection is lost and the blue LED breathes as if trying to connect.Simply reconnect the AVAA C214 to keep it connected, even after switching it off and on again.In summary: after [...]
There is a dropdown menu near the small arrow on the application.Press the arrow and the devices will appear below.
Make sure you only have one single application open, and make sure the AVAAs are “forgotten” on any other devices connected to the same network.
The pairing process was successful and your AVAA C214 is already registered in the application The network information was updated correctly.
Yes, enable Hotspot and wifi. You can fill in the SSID with your Hotspot’s name and password.This should work in most case with Android phones.
The AVAA-C214 is unable to reach the router/network and is trying to reconnect until it finds the network. Please check that the router is up and running.
Either the router is powered off or the credentials given during the process are incorrect.Please check that the router is up and running. Check the credentials. Check that the wifi band is 2.4 GHz.
This means that credentials have been sent to the AVAA C214 and the router was able to assign an IP address to the AVAA C214. There are too many stages in the network such as repeaters, switches, etc. The smartphone switched network to return to its preferred network. As a result smartphone and AVAA C214 are [...]
The AVAA C214 is too far from the network source.